2020年5月15日星期五

The type of Gate Valves

Gate Valve is the closing part along the vertical direction of the center line of the valve.It mainly composed by the valve body, bonnet,stem.gate, sealing filler and drive device and other components, both ends of the valve body with a flange or thread connected to the formation of media channels. Gate valve in the pipeline for the main cut off. Gate valve is a very wide use of a valve, the general diameter DN ≥ 50mm cutting device are used it, sometimes small diameter cut device also use the gate valve.Gate valve has parallel gate valve and wedge gate valve.
We also globe valve and check valve, if you need, welcome to contact us.
时间：

没有评论:

发表评论

订阅： 博文评论 (Atom)

Are Globe Valves Good for Flow Control?

  https://www.yuandavalves.com/globe-valve-wholesale/ When it comes to regulating and controlling fluid flow, choosing the right valve is cr...

  • Gate Valve Introduction
    Gate valve is a widely used valve. Its closure principle is that the gate seal surface and the valve seat sealing surface are smooth, fl...
  • Do You Have to Test valve's Appearance?
    Why is the valve such as   Pneumatic Drive Type Butterfly Valve   always faulty, do you have to test its appearance? 1. There are defects su...
  • Industrial Valve Types and Applications
    Valves are employed in just about any situation involving the flow of liquid or gas. A valve controls the flow of water through your kitchen...